WoodCrafters White Flannel Blanket Rags

White Flannel Blanket Rags

100% Cotton White Flannel blankets are already broken in and laundered, making them highly absorbent for immediate use right out of the box. White Flannel Blanket Rags are great wipers.

WoodCrafters White Flannel Blanket Rags Features & Benefits

Natural Vertical Bamboo Wood Mouldings

Stair Nosing Moulding Bamboo Natural Vertical Moulding

Stair Nosing Bamboo Natural Vertical Moulding is also called stair nose, bull nose, stairwell trim and landing tread. These Bamboo Natural Vertical Molidngs are used to create finished edges on the top step, around stairwell, sunken living room, etc. The detail of using the correct mouldings makes for a good installation, and speaks well of the installer. The Natural Vertical Bamboo Stair Nose generally combines style and function to create an attractive threshold that catches the brunt of floor traffic while enhancing the beauty of a staircase or step. The Natural Vertical Bamboo Stair Nose also provides the proper overhang for a transition from one floor level to the next such as the step into a sunken living room.

Natural Vertical Bamboo Satir Nose Moulding

Wood Species:	Bamboo
Moulding Stain:	Natural Vertical
Origin Country:	China
Botanical Name:	Phyllostachys, pubescens
Surface Finish:	Prefinished
Maximum Thickness:	1" (25.4 mm)
Maximum Width:	3-1/2" (88.90 mm)
Moulding Length:	72" (1.82 m)

Janka Hardness Score:	1400
Protective Finish:	Aluminum Oxide (8 coats)

Know Where Your Natural Vertical Bamboo Moulding Come From

Natural Bamboo Mouldings are made of the Bamboo Tree. To read more about Bamboo tree and the Bamboo wood please visit our Bamboo Wood Species Information Page

How To Install Stair Nosing Bamboo Natural Vertical Moulding

This Bamboo Natural Vertical Stair Nosing Moulding is available in tongue and groove configuration, for easy connection to the hardwood floors. When used on a stair step, the Bamboo Natural Vertical Stair Nose moulding should cover and overlap the riser. When used on a step-up to another room, the Natural Vertical Bamboo Stair Nose moulding becomes the starting "edge" of the floor. Because of the interlocking of the moulding with the floor, the Natural Vertical Bamboo Stair Nose moulding should be installed first. Once the moulding is in place, the interlocking floor can be installed out from this point. To install the Natural Vertical Bamboo Stair Nose Molding, apply one or two 1/4 inch beads of construction adhesive to the subfloor and seat the moulding in place If nailing, pre-drill the Natural Bamboo moulding to prevent splitting and nail to the subfioor. To assure a flat surface in any glue down installation, it is recommend that the molding be taped to the floor while the glue is setting up.

Hardwood Floors Matching To This Vertical Natural Bamboo Mouldings

Natural Vertical Bamboo Hardwood Flooring

Carbonized Horizontal Bamboo Wood Mouldings

Bamboo Carbonized Horizontal Stair Nosing Moulding is also known as s stair nose, bull nose, stairwell trim and landing tread. These Bamboo Carbonized Horizontal Molidngs are used to create finished edges on top steps, around stairwells, sunken living rooms, etc. Using correct mouldings is essential in facilitating the installation process and the installers working method as a whole. The Carbonized Horizontal Bamboo Stair Nose generally combines style and function to create an attractive threshold that catches the brunt of floor traffic while enhancing the beauty of a staircase or step. The Carbonized Horizontal Bamboo Stair Nose also provides the proper overhang used for a transition between one floor level to the next, such as a step leading into a sunken living room.

Carbonized Horizontal Bamboo Satir Nose Moulding

Wood Species:	Bamboo
Moulding Stain:	Carbonized Horizontal
Origin Country:	China
Botanical Name:	Phyllostachys, pubescens
Surface Finish:	Prefinished
Maximum Thickness:	1" (25.4 mm)
Maximum Width:	3-1/2" (88.90 mm)
Moulding Length:	72" (1.82 m)

Janka Hardness Score:	1120
Protective Finish:	Aluminum Oxide (8 coats)

Know Where Your Carbonized Horizontal Bamboo Moulding Come From

Carbonized Bamboo Mouldings are made of the Bamboo Tree. To read more about Bamboo tree and the Bamboo wood please visit our Bamboo Wood Species Information Page

How To Install Stair Nosing Bamboo Carbonized Horizontal Moulding

This Bamboo Carbonized Horizontal Stair Nosing Moulding is available in tongue and groove configuration, for easy connection to the hardwood floors. When used on a stair step, the Bamboo Carbonized Horizontal Stair Nose moulding should cover and overlap the riser. When used on a step-up to another room, the Carbonized Horizontal Bamboo Stair Nose moulding becomes the starting "edge" of the floor. Because of the interlocking of the moulding with the floor, the Carbonized Horizontal Bamboo Stair Nose moulding should be installed first. Once the molding is in place, the interlocking floor can be installed out from this point. To install the Carbonized Horizontal Bamboo Stair Nose Moulding, apply one or two 1/4 inch beads of construction adhesive to the subfloor and seat the moulding in place If nailing, pre-drill the Carbonized Bamboo moulding to prevent splitting and nail to the subfioor. To assure a flat surface in any glue down installation, it is recommend that the moulding be taped to the floor while the glue is setting up.

Hardwood Floors Matching To This Horizontal Carbonized Bamboo Mouldings

Carbonized Horizontal Bamboo Hardwood Flooring

Sound Reduction Underlayment

This Sound Solution Underlayment is the optimized supplement for Hardwood flooring installations. The Sound Reduction Underlayment has amazing acoustic insulation properties and moisture resistants.

Foam Sound Reduction Underlayment is 100% Environmentally Friendly!

Sound Reduction Underlayment Specifications

Thickness:	0.118" inch. (3mm)
Roll Width:	3-6/16 ft. (1.0m)
Square Footage per Roll:	200 Sq/ft

Sound Reduction Underlayment Functions & Purposes

The Sound Solution Underlayment reduces reflective sound and through-the-floor sound transmission. It is designed to provide a walk-on sound similar to that of traditional wood floors. This Foam Flooring Underlayment has a built-in moisture barrier suitable for use over both concrete and wood sub-flooring. Sound Solution Underlayment exceeds recommended moisture permeability ratings for installation over concrete slabs. it is strong enough for residential as well as the most demanding commercial installations.

Solid Walnut Hardwood Flooring

This is a Prefinished Solid Walnut Hardwood Floor with a Natural Stain. This Walnut Floor comes with a Flat, Smooth surface finish, coated with 8 Layers of Aluminum Oxide. These layers provide your hardwood with durability, stability and protection for many years. This Solid Walnut wood floor comes in a thickness of 3/4" inch, and in widths of 2-1/4", 3", 3-9/16" and 4" inches.

Flooring Specifications

Wood Species:	Walnut
Wood Stain:	Natural Walnut
Origin Country:	North America
Botanical Name:	Juglans nigra
Board Thickness:	3/4" (19.05 mm)
Board Lenth:	Random
Sutface Finish:	Flat
Janka Hardness Score:	1010
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

100% Solid Walnut Wood Flooring

This Walnut Flooring is made of 100% percent solid Walnut wood. To read more about Solid Hardwood Flooring and Solid Wood please visit our Solid Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Solid Walnut Wood Flooring?

This Solid Walnut Flooring can be installed by Nail Down or Staple Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Walnut Floors Come From

Walnut Wood Floors are made of the Walnut Tree. To read more about Walnut tree and the Walnut wood please visit our Walnut Wood Species Information Page

Match Hardwood Flooring Mouldings to This Floor

Looking for a Walnut Reducer Moulding to match to this floor? Or maybe a Walnut T-Moulding? Please visit our Walnut Mouldings Page

Hand Scraped Pilang Wood Flooring With Golden Stain

This is a Prefinished Solid Pilang Distressed Hardwood Flooring with Golden Stain. The Pilang (aka Exotic Walnut) Floors come with Hand-Scraped surface finish, coated with 8 Layers of Aluminum Oxide. This coating provides your hardwood with durability, stability and protection for many years. This solid pilang wood floors come with thickness of 3/4" and 4-27/32" inches.

Flooring Specifications

Wood Species:	Pilang (Exotic Walnut)
Wood Stain:	Golden
Origin Country:	Indonesia
Botanical Name:	Acacia leucophloea
Board Thickness:	3/4" (19.05 mm)

Board Lenth:	Random
Sutface Finish:	Hand-Scraped
Janka Hardness Score:	1450
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

100% Solid Pilang Wood Flooring

This Pilang Flooring is made of 100% percent solid Pilang wood. To read more about Solid Hardwood Flooring and Solid Wood please visit our Solid Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Solid Pilang Wood Flooring?

This Solid Pilang Flooring can be installed by Nail Down or Staple Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Pilang Floors Come From

Pilang Wood Floors are made of the White Bark Acacia Pilang Tree. To read more about Pilang tree and the Pilang wood please visit our Pilang Wood Species Information Page

PowerNail PowerJack Model 100

PowerNail Flooring Jack

The PowerNail Powerjack Model 100 flooring jack is a professional tool offering a durable design capable of standing up to the rigors of daily use. PowerJack 100 is constructed of the best materials available and made in the USA, it is a quality tool designed for use by professional installers.

PowerNail PowerJack Model 100 Functions & Purposes

The PowerNail Powerjack 100 Flooring Jack is designed to pull crooked strip flooring into place for nailing and keep it in place without the need to hold it in position. It frees you and your hands for nailing.
PowerNail PowerJack 100 will work on any thickness flooring without damaging the flooring surface. It can be used next to the wall at stud locations or anywhere on the floor.

PowerNail PowerJack Model 100 Features & Benefits

PowerNail 445FS Pneumatic Stapler

You can now get the quality and durability of Powernail Nailers in a convenient stapler. The new Powernail 445FS mallet actuated pneumatic stapler uses the same proven design, which has made the powernail nailers the standard of the commercial flooring industry for over 50 years. You can be assured that the Powernail 445FS Pneumatic Stapler will stand up to the rigors of daily use for years and that it will help you install a floor you can be proud of. The Powernail 445FS Pneumatic Stapler has been designed to be used with the new powernail PowerStaples in 1-1/2", 1-3/4 and 2" sizes for 1/2", 3/4" and 32/32" tongue and groove.

PowerNail 445FS Pneumatic Stapler Features & Benefits

More Details About PowerNail 445FS Pneumatic Stapler

For the full parts list directly from the manufacturer website please click here
To watch the PowerNail 445FS Pneumatic Stapler demonstration video directly from the manufacturer website please click here

Padco Floor Trim Pads

Padco Floor Appliactor

Padco Floor Trim Pad is excellent for edging and cutting in floors. This padco floor applicator has more than thousands of fibers that hold more finish and spread it faster.
Padco Floor Trim Pads are especially for waterborne and mild solvent finishes.
This padco floor applicator has a handle that accepts threaded extension poles.

Padco 18" T-Bar Professional Floor Coater

Padco Lightweight Floor Coater

Padco T-bar Professional Floor Coaters have become the industry standard for the application of floor coatings. Padco professional floor coater apply a wide range of waterborne and mild solvent finishes to large areas, with professional, even, consistent coverage every time. The unique cushioned squeegee action of this padco floor coater leaves a smooth, streak and bubble-free finish with amazing speed.
Large areas such as hallways, gym floors, open commercial and residential spaces are finished flawlessly in record time with Padco Professional Floor Coaters.
Padco applicators are weighted to control the mil thickness of the coating. Lightweight applicators apply a heavier coating.
Padco Floor Coaters come with a convenient swivel handgrip that accepts standard threaded extension poles.

Norton Abrasives 16" Sanding Screen Disc

Norton Abarasives Sanding Screens

Norton Abrasives 16" Sanding Screen Discs used on an orbital floor sander are ideal for removing old finishes, wax and scuffs. Those sanding screen discs also used in the final stages of floor sanding to smoothen raised grain and the picture framing effect left by belt/drum and edger machines.

Norton Abrasives 16" Sanding Screen Disc Specifications

Quantity:

1 Screen Disc in a box

Norton Abrasives 16" Sanding Screen Disc Features & Benefits

Norton Abrasives 16" Dark Maroon Sanding Pad

16" Dark Maroon General Purpose Sanding Pad

Norton Abrasives 1/4" thick conditioning pads are manufactured with the finest fibers, resins and abrasives to allow multiple levels of surface blending of water-based urethanes on hardwood floors.
Norton Abrasives 16" Dark Maroon Sanding Pad is designed for deburring, smoothing, cleaning and general surface conditioning of wood floor surfaces between coats of water-based or solvent based finishes.

Norton's Dark Maroon Sanding Pad is Perfect for Wet Scrubbing

The new Norton Abrasives 16" Dark Maroon Sanding Pads now have a perforated 7" x 7/8" edger disc punch out!

Norton Abrasives 16" Dark Maroon Sanding Pad Features & Benefits

Engineered White Oak Hardwood Flooring

This is a Prefinished Engineered White Oak Hardwood Flooring with a Golden Stain. The White Oak Floors come with a Flat, Smooth surface finish, coated with 8 Layers of Aluminum Oxide. These layers provide your Hardwood with durability, stability and protection for years to come. This White Oak Engineered wood floor comes in a thickness of 9/16" inches and in widths of 3" (Grades A & B), 3-9/16" (Grades A & B) and 4" inches.

Flooring Specifications

Wood Species:	White Oak
Wood Stain:	Golden
Origin Country:	United States
Botanical Name:	Quercus alba
Board Thickness:	9/16" (14.28 mm)

Board Lenth:	Random
Sutface Finish:	Flat
Janka Hardness Score:	1360
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

Multi-Layer Engineered White Oak Wood Flooring

This White Oak Flooring is made of Engineered, Multi-Layer Construction for Higher Dimensional Stability and Durability. To read more about Engineered Hardwood Flooring and Engineered Wood please visit our Engineered Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Engineered White Oak Wood Flooring?

This Engineered White Oak Flooring can be installed by Nail Down, Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your White Oak Floors Come From

White Oak Wood Floors are made of the White Oak Tree. To read more about White Oak tree and the White Oak wood please visit our White Oak Wood Species Information Page

Hand Scraped Walnut Hardwood Flooring

This is a Prefinished Engineered Hand Scraped Walnut Hardwood Flooring with an Espresso Stain. The Walnut Floors come with a Hand Scraped - Distressed surface finish, coated with 8 Layers of Aluminum Oxide. These layers provide your Hardwood with durability, stability and protection for years to come. This Hand Scraped Walnut Engineered wood floor comes in a thickness of 9/16" inch and in widths of 5" and 6" inches.

Flooring Specifications

Wood Species:	Walnut
Wood Stain:	Espresso
Origin Country:	North America
Botanical Name:	Juglans nigra
Board Thickness:	9/16" (14.28 mm)

Board Lenth:	Random
Sutface Finish:	Hand Scraped
Janka Hardness Score:	1010
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

Multi-Layer Engineered Walnut Wood Flooring

This Hand Scraped Walnut Flooring is made of Engineered, Multi-Layer Construction for Higher Dimensional Stability and Durability. To read more about Engineered Hardwood Flooring and Engineered Wood please visit our Engineered Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Engineered Walnut Wood Flooring?

This Engineered Walnut Flooring can be installed by Nail Down, Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Walnut Floors Come From

Walnut Wood Floors are made of the Walnut Tree. To read more about Walnut tree and the Walnut wood please visit our Walnut Wood Species Information Page

Hand Scraped Maple Hardwood Flooring

This is a Prefinished Engineered Hand Scraped Maple Hardwood Floor with a Midnight Stain. The Maple Floors come with Hand Scraped - Distressed surface finish, coated with 8 Layers of Aluminum Oxide. These layers provide your Hardwood with durability, stability and protection that will last for years. This Hand Scraped Maple Engineered wood floor comes in a thickness of 9/16" inch and in a width of 5" inches.

Flooring Specifications

Wood Species:	American Maple
Wood Stain:	Midnight
Origin Country:	United States
Botanical Name:	Acer saccharum
Board Thickness:	9/16" (14.28 mm)

Board Lenth:	Random
Sutface Finish:	Hand Scraped
Janka Hardness Score:	1450
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

Multi-Layer Engineered Maple Wood Flooring

This Hand Scraped Maple Flooring is made of Engineered, Multi-Layer Construction for Higher Dimensional Stability and Durability. To read more about Engineered Hardwood Flooring and Engineered Wood please visit our Engineered Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Engineered Maple Wood Flooring?

This Engineered Maple Flooring can be installed by Nail Down, Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Maple Floors Come From

Maple Wood Floors are made of the Maple Tree. To read more about Maple tree and the Maple wood please visit our Maple Wood Species Information Page

Hand Scraped Maple Hardwood Flooring

This is a Prefinished Engineered Hand Scraped Maple Hardwood Flooring with a Mocha Stain. The Maple Floors come with a Hand Scraped - Distressed surface finish, coated with 8 Layers of Aluminum Oxide. Thes leayers provide your Hardwood with durability, stability and protectionthat will last for years. This Hand Scraped Maple Engineered wood floor comes in a thickness of 9/16" inch and in a width of 5" inches.

Flooring Specifications

Wood Species:	American Maple
Wood Stain:	Mocha
Origin Country:	United States
Botanical Name:	Acer saccharum
Board Thickness:	9/16" (14.28 mm)

Board Lenth:	Random
Sutface Finish:	Hand Scraped
Janka Hardness Score:	1450
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

Multi-Layer Engineered Maple Wood Flooring

This Hand Scraped Maple Flooring is made of Engineered, Multi-Layer Construction for Higher Dimensional Stability and Durability. To read more about Engineered Hardwood Flooring and Engineered Wood please visit our Engineered Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Engineered Maple Wood Flooring?

This Engineered Maple Flooring can be installed by Nail Down, Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Maple Floors Come From

Maple Wood Floors are made of the Maple Tree. To read more about Maple tree and the Maple wood please visit our Maple Wood Species Information Page

Hand Scraped Maple Hardwood Flooring

This is a Prefinished Engineered Hand Scraped Maple Hardwood Flooring with a Cream Stain. All of our Maple Floors come with Hand Scraped - Distressed surface finish, coated with 8 Layers of Aluminum Oxide. These layers provide your Hardwood with durability, stability and protection that will last for years. This Hand Scraped Maple Engineered wood floor comes in a thickness of 9/16" inch, and in a width of 5" inches.

Flooring Specifications

Wood Species:	American Maple
Wood Stain:	Cream
Origin Country:	United States
Botanical Name:	Acer saccharum
Board Thickness:	9/16" (14.28 mm)

Board Lenth:	Random
Sutface Finish:	Hand Scraped
Janka Hardness Score:	1450
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

Multi-Layer Engineered Maple Wood Flooring

This Hand Scraped Maple Flooring is made of Engineered, Multi-Layer Construction for Higher Dimensional Stability and Durability. To read more about Engineered Hardwood Flooring and Engineered Wood please visit our Engineered Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Engineered Maple Wood Flooring?

This Engineered Maple Flooring can be installed by Nail Down, Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Maple Floors Come From

Maple Wood Floors are made of the Maple Tree. To read more about Maple tree and the Maple wood please visit our Maple Wood Species Information Page

Duvall Adhesives - Cork Adhesive

Duvall Cork Adhesive is a premium, non-flammable, fast tack, latex-based adhesive that provides a strong intial grab. This Cork Adhesive is also water-resistant, economic, firm bonding and easily spreadable, showing it's value as a premium Hardwood adhesive!

Duvall Cork Adhesive Functions & Purposes

Duvall Cork Adhesive is especially formulated for the installation of Cork Underlayments.
Duvall Cork Adhesive can also be used over plywood, association grade particle board, or underlayment quality, and concrete on, above and below grade level.

Duvall Cork Adhesive Specifications

Duvall Cork Adhesive Coverage:	100-120 Sq/ft per 1 Gal.
Duvall Cork Adhesive Bucket Size:	4 Gal. Buckets (15.14L)

Duvall Cork Adhesive Installation Instructions

All subsurfaces must be sound, clean, dry, free of wax, dirt, dust, grease and free of alkali. Spread cork adhesive and let become "tacky" before laying the cork underlayment.

Dura Seal X-TERRA Waterbased Floor Finish

Dura Seal X-TERRA Waterbased Floor Finish is a urethane and acrylic based resin blend, designed specifically for commercial and high traffic residential hardwood floors. Dura Seal X-TERRA Waterbased Floor Finish has a unique technology that provides top quality finish and durability for high traffic Hardwood floors.

Dura Seal X-TERRA Waterbased Floor Finish Specifications

Bottle Size:	113 FL Oz (3.34L)
Dry Time & Cure:	1. Recoat time: 2-3 hours between coats. 2. Light foot traffic is acceptable after 24 hours. 3. Allow one week before exposing finish to rugs, cleaners, spills or heavy traffic.
Coverage:	Approximately 350-400 sq.ft. per gallon.
Clean Up:	Application tools should be cleaned with warm water immediately after use.
Maintenance:	Use walk-off mats at all entrance doorways to keep dirt and grit to a minimum. Sweep or vacuum daily and damp wipe as needed with Dura Seal Hardwood Floor Cleaner.
Storage:	Store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. If frozen, slowly warm to room temperature and mix thoroughly before using.
Pot Life:	THE FINISH/HARDENER MIX MUST BE USED WITHIN 4 HOURS AFTER IT IS MIXED. Product properties are diminished after 4 hours. The finish and hardener can only be mixed one time.

Dura Seal Quick Coat Penetrating Finish Wood Stain

Dura Seal Penetrating Finish Wood Stain is a semitransparent Hardwood stain formulated to seal, color, and stregthen bare interior Hardwood masonry surfaces. Dura Seal Wood Stain contains a rich blend of oil and resin that gives hardwood floors a soft, satiny sheen. Dura Seal Penetrating Finish Wood Stain can be used with or without a finish coat.
Available in colors to match any decor, DURA SEAL Penetrating Finish Wood Stain creates a bond with the wood that won't scratch or wear away.

Dura Seal Quick Coat Penetrating Finish Specifications

Can Size:	1 Qt. (32 fl. oz.) - 0.946L
Dry Time & Cure:	Approximately 2 hours.
Coverage:	First coat - approximately 125 square feet per gallon (Optional second coat - approximately 200 square feet per gallon).
Clean Up:	Clean equipment using paint thinner, turpentine or mineral spirits.
Maintenance:	Regularly remove dust and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat.
Solvent:	Non-photochemically reactive.

DriTac Wood Floor Repair Kit

DriTac has developed a system to repair the hollow spots and popping conditions that occur within engineered hardwood flooring installations. These defects cost the flooring industry millions of dollars per year. Studies and experience show that a major cause of these problems occurring in engineered hardwood floor installations are adhesive voids between the flooring and the sub floor.

DriTac Engineered Flooring Repair Kit Features & Benefits

DriTac Engineered Flooring Repair Kit Contains:

For the replenish pack for the dritac solid and bamboo repair kit please click on the following link:
Dritac Solid Wood & Bamboo Floor Repair Kit - Replenish Pack

DriTac Wood Floor Repair Kit

DriTac Adhesive Group has developed a system to repair the hollow spots and popping conditions of Solid and Bamboo Hardwood flooring installations.The samecompany that introduced the most popular Hardwood flooring repair kit on today's market, the DriTac Engineered Wood Floor Repair Kit, comes a new repair kit for the use of Solid and Bamboo Hardwood floors.
DriTac Invented the Complete Professional Wood Floor Repair Kit for repairing hollow spots, endlifting and loose areas.
Your Hardwood floor can be walked on immediately after repair and there is no need to weigh down the repaired area. The DriTac Repair Kit Adhesive is very easy to clean-up with the use of just a simple damp cloth.

DriTac Solid Wood and Bamboo Floor Repair Kit Features & Benefits

DriTac Solid Wood and Bamboo Floor Repair Kit Contains:

For more information from the manufacturer website please click here

DriTac Professional Wood Floor Repair Adhesive

DriTac Professional Wood Floor Repair Adhesive repairs hollow spots, endlifting and loose areas within your Hardwood flooring.

The DriTac Professional Wood Floor Repair Adhesive is the adhesive found in the complete DriTac Wood Floor Repair Kit

DriTac Professional Wood Floor Repair Adhesive Features & Benefits

DriTac 7500 Eco - Urethane Premium Green Wood Flooring Adhesive

DriTac 7500 Eco - Urethane Adhesive is formulated to provide high initial tack, low odor, and excellent permanent adhesion. Once cured, DriTac 7500 Ec-Urethane Adhesive is not affected by exposure to moisture or water. DriTac 7500 Urethane adhesive contains zero (0) V.O.C.'s. It is a trowel applied adhesive with 100% solids and excellent coverage. DriTac 7500 eco-Urethane Adhesive is a water-resistant adhesive which provides vapor-retarding characteristics to Hardwood floor installations. Dritac 7500 urethane adhesive is recommended by installers for both residential and commercial installations.

DriTac 7500 Eco - Urethane Premium Green Adhesive Functions & Purposes

DriTac 7500 Eco - Urethane Adhesive is best when being used with 3 Ply Engineered Plank, 5 Ply Engineered Plank, Wood Parquet, Acrylic Impregnated Wood, Solid Plank flat-milled, Solid Shorts and Plywood

DriTac 7500 Eco - Urethane Premium Green Adhesive Features & Benefits

DriTac 7500 Eco - Urethane Premium Green Adhesive Specifications

DriTac 7500 Eco - Urethane Adhesive Bucket Size:	4 GAL buckets (15.2L)
DriTac 7500 Eco - Urethane Adhesive Coverage:	50-80 Sq/ft per 1 GAL

Crain 820 Heavy Duty Undercut Saw

Crain Specialty Saw

A more powerful version of our popular CRAIN 555 Saw. The CRAIN 820 Heavy Duty Undercut Saw comes with a 6-1/2 diameter carbide-tipped blade that can fully undercut most doors in place. This Crain Heavy Duty Saw also included is the No. 805 Masonry Blade for undercutting hearths. The Crain 820 Heavy Duty saw undercuts walls, jambs, inside corners, and even most toe-spaces. This crain 812 undercut saw comes with carrying case, hex wrench, and instructions. It does it all - a real value for the price!

Crain 820 Heavy Duty Undercut Saw Specifications

Rating:	120 Volt AC
Amperage:	8.15
No-load RPM:	8,000

Max Cutting Height:	1"
Max Cutting Depth:	1-5/8"
Weight:	14 lbs

Crain 820 Heavy Duty Undercut Saw Features & Benefits

More Details About Crain 820 Heavy Duty Undercut Saw

For the full parts list from the manufacturer website please click here

Cork Underlayment Sheets - 1/4" Thick

Cork Underlayment Sheets are the number one choice when it comes to sound control in flooring underlayment. Cork underlayment is generally needed because buildings have in their bylaws a stipulation that requires the homeowner or contractor to use a specific type of sound control underlayment before installing hard surfaces such as Hardwood flooring. The Cork Underlayment Sheets contain millions of air-filled pockets per cubic inch. These air pockets compress under pressure, regaining their shape once pressure is removed thereby creating a gentle cushiony surface flooring material. There are over 100,000,000 air cells per cubic inch in the Cork Underlayment, which act as a sort of shock absorber and sound muffler. With cork underlayment you are literally walking on air! These characteristics are also the reason behind cork's success as an acoustic insulation.

Cork Underlayment Specifications

Cork Sheets Dimensions:	3' feet (915mm) long x 2' feet (610mm) wide x 1/4" inch. (6mm) thick
Coverage:	300 Square/Feet per Box
Density:	190-210 kgs/cbm

Cork Flooring Underlayments Sheets Functions & Purposes

Cork Underlayment can be used as a flooring underlayment for ceramic tiles, wooden floors, and laminate floors like Pergo. The cork is also can be used for bulletin boards and to help reduce noise. Cork Underlayment is also especially beneficial when used as a crack suppression barrier that will effectively prevent settling cracks that occur in the slab from affecting tile or marble.
The extremely unique cellular makeup of the cork underlayment contributes to its unparalleled thermal insulation and resilience, as well as the unequalled sound absorbency and added benefit of having excellent fire resistance qualities. These added benefits make this a natural choice for professional flooring installers of hard surfaces everywhere.

Cork Underlayment Sheets Installation

We recommend using Duvall Cork Underlayment Adhesive. This Cork Underlayment Adhesive covers up to 100-120 sq. ft. per Gallon. Attaching the cork underlayment sheets to the subfloor with this adhesive is only necessary if you plan on attaching the flooring above the cork underlayment to the cork underlayment. Determining this depends on what type of flooring you choose. For example, floating flooring would be laid on top of the cork underlayment and would not need to be attached but ceramic tile would need to be attached to the cork sheets.

Cork Underlayment Acoustic Results

	Ceramic Surface		Wood Surface
Subfloor	STC	IIC	STC	IIC
Concrete Slab 8"	58	61	56	63
Concrete Slab 6"	53	60	54	60
Concrete Slab 4" & Steel Deck	60	65	60	66
Wood Joist Construction	54	60	54	61

Cork Underlayment Sheets - 1/2" Thick

Cork Underlayment Sheets are the number one choice when it comes to sound control in flooring underlayment. Cork underlayment is generally needed because buildings have in their bylaws a stipulation that requires the homeowner or contractor to use a specific type of sound control underlayment before installing hard surfaces such as Hardwood flooring.. The Cork Underlayment Sheets contain millions of air-filled pockets per cubic inch. These air pockets compress under pressure, regaining their shape once pressure is removed thereby creating a gentle cushiony surface flooring material. There are over 100,000,000 air cells per cubic inch in the Cork Underlayment, which act as a sort of shock absorber and sound muffler.With cork underlayment you are literally walking on air! These characteristics are also the reason behind cork's success as an acoustic insulation.

Cork Underlayment Specifications

Cork Sheets Dimensions:	3' feet (915mm) long x 2' feet (610mm) wide x 1/2" inch. (12mm) thick
Coverage:	150 Square/Feet per Box
Density:	190-210 kgs/cbm

Cork Flooring Underlayments Sheets Functions & Purposes

Cork Underlayment can be used as a flooring underlayment for ceramic tiles, wooden floors, and laminate floors like Pergo. The cork is also can be used for bulletin boards and to help reduce noise. Cork Underlayment is also especially beneficial when used as a crack suppression barrier that will effectively prevent settling cracks that occur in the slab from affecting tile or marble.
The extremely unique cellular makeup of the cork underlayment contributes to its unparalleled thermal insulation and resilience, as well as the unequalled sound absorbency and added benefit of having excellent fire resistance qualities. These added benefits make this a natural choice for professional flooring installers of hard surfaces everywhere.

Cork Underlayment Sheets Installation

We recommend using Duvall Cork Underlayment Adhesive. This Cork Underlayment Adhesive covers up to 100-120 sq. ft. per Gallon. Attaching the cork underlayment sheets to the subfloor with this adhesive is only necessary if you plan on attaching the flooring above the cork underlayment to the cork underlayment. Determining this depends on what type of flooring you choose. For example, floating flooring would be laid on top of the cork underlayment and would not need to be attached but ceramic tile would need to be attached to the cork sheets.

Cork Underlayment Acoustic Results

	Ceramic Surface		Wood Surface
Subfloor	STC	IIC	STC	IIC
Concrete Slab 8"	58	61	56	63
Concrete Slab 6"	53	60	54	60
Concrete Slab 4" & Steel Deck	60	65	60	66
Wood Joist Construction	54	60	54	61

Bostik's Best Wood Floor Adhesive

BOSTIK'S BEST is a one-part, trowel applied, tacking, moisture-cured urethane adhesive. This advanced formula of Bostik's Best Adhesive does NOT contain any water. Once cured, Bostik's Best is waterproof and is not affected by moisture or water; its superior properties provide a tough, flexible and tenacious bond to a variety of surfaces. Bostik's Best Wood Floor Adhesive holds elastomeric characteristics, which allows the adhesive to expand and contract according to the movement of the Hardwood floor.

Bostik's Best is currently the number one selling urethane in the Hardwood Industry!

Bostik Bostik's Best Wood Floor Adhesive Functions & Purposes

BOSTIK'S BEST may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This wood floor adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.

Bostik Bostik's Best Wood Floor Adhesive Features & Benefits

Bostik Bostik's Best Wood Floor Adhesive Specifications

Bostik Bostik's Best Wood Floor Adhesive Coverage:

60-80 Sq/ft per 1 GAL

More Details About Bostik Bostik's Best Wood Floor Adhesive

To watch the Bostik Bostik's Best Wood Floor Adhesive Installation Demo Video in please click here

Bona Mega Waterborne Wood Floor Finish

Bona Mega Waterborne Wood Floor Finish is the revolutionary, oxygen-crosslinking, waterborne wood floor finish which can be used on heavy-traffic residential and commercial Hardwood floors. Bona Mega's unique OCP (Oxygen-Crosslinking Polyurethane) formula uses oxygen in the air as a crosslinker. Bona Mega is the world's leading waterborne finish, providing exceptional durability, hygiene and beauty.

Bona Mega Waterborne Wood Floor Finish Can Be Used For:

Bona Mega Waterborne Wood Floor Finish Specifications

Bottle Size:

1 Gal. (3.79L)

Bona Mega Waterborne Wood Floor Finish Features & Benefits

Bona Hardwood Floor Mop

This new ergonomic mop by Bona makes cleaning your Hardwood Floor easy and quick. It's designed specifically to protect and conserve your the grain and finish of your Hardwood Floor.
Bona's Hardwood Floor Mop is a GREENGUARD certified, non-toxic product, which ensures the best air quality for your Home, your familiy and the environment.

Swedish Formula Hardwood Flooring Cleaner

Bona Hardwood Floor Mop Features & Benefits

Bona Hardwood Floor Mop Kit Containes:

Bona Hardwood Floor Care System

Within this Hardwood Floor Care System is everything you need for the easy and safe cleaning of your polyurethane-finished Hardwood Floor.
Uses an Advanced Microfiber floor cleaning technology.

Swedish Formula Hardwood Floor Care System

Bona Hardwood Floor Care System Contains:

Bona Bonaseal Waterborne Wood Floor Sealer

As a foundation of the Bona waterborne systems, Bona Bonaseal can be used with all Bona waterborne finishes. Bona Bonaseal seals your Hardwood flooring, minimizes grain raise, reduces tendency to sidebond, provides a build layer and prevents the finish from penetrating into the wood surface.

Bona Bonaseal Waterborne Wood Floor Sealer Functions & Purposes

Bona Bonaseal is best for use with residential wood floors, commercial wood floors, for use on natural (newly sanded) wood floors and for use over Bona DriFast Stains.

Bona Bonaseal Waterborne Wood Floor Sealer Features & Benefits

Bona Bonaseal Waterborne Wood Floor Sealer Specifications

Bona Bonaseal Coverage:

500-600 Sq/ft per 1 Gal.

Bamboo Carbonized Horizontal Wood Base Mouldings

Carbonized Bamboo Horizontal Base Board Moulding is used primarily to make transitions between bamboo hardwood floors and the adjacent wall. This Prefinished Carbonized Horizontal Bamboo Base Board Moulding gives the desired, clean look to your bamboo hardwood and the room as a whole. The carbonized bamboo base board mouldings are also used to hide the space left between the hardwood floor and the wall adjacent to it. (space left for the Hardwood expansion process)

Bamboo Carbonized Horizontal Base Board Moulding

Wood Species:	Bamboo
Moulding Stain:	Carbonized Horizontal
Origin Country:	China
Botanical Name:	Phyllostachys, pubescens
Surface Finish:	Prefinished
Maximum Thickness:	7/16" (11.1125 mm)
Maximum Width:	3-1/2" (88.90 mm)
Moulding Length:	72" (1.82 m)

Janka Hardness Score:	1120
Protective Finish:	Aluminum Oxide (8 coats)

Know Where Your Carbonized Horizontal Bamboo Moulding Come From

Carbonized Bamboo Mouldings are made of the Bamboo Tree. To read more about Bamboo tree and the Bamboo wood please visit our Bamboo Wood Species Information Page

How To Install Bamboo Carbonized Horizontal Base Board Moulding

This Carbonized Horizontal Bamboo Base Board Moulding must be installed after the hardwood flooring installation is completely over. Don't forget to leave enough space between the bamboo hardwood floors to the wall in order to let the wood to contract and expand. The bamboo base boards mouldings need to be fastened to the wall (not to the hardwood floors). We recommend pre-drill the base boards moulding to avoid splitting.

Hardwood Floors Matching To This Horizontal Carbonized Bamboo Mouldings

Carbonized Horizontal Bamboo Hardwood Flooring

Carbonized Bamboo Hardwood Flooring

This is a Prefinished Solid Bamboo Hardwood Flooring with a Vertical Carbonized Stain. The Bamboo Floors come with a Flat, Smooth surface finish, coated with 8 Layers of Aluminm Oxide. These layers provide your Hardwood with durability, stability and protection for years to come. This Solid Bamboo wood floor comes in a thickness of 5/8" inches and in a width of 3-3/4" inches.

Flooring Specifications

Wood Species:	Bamboo
Wood Stain:	Carbonized - Vertical
Origin Country:	China
Botanical Name:	Phyllostachys, pubescens
Board Thickness:	5/8" (15.875 mm)

Board Lenth:	37.8" (96.4 cm)
Sutface Finish:	Flat
Janka Hardness Score:	1120
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

100% Solid Bamboo Wood Flooring

This Bamboo Flooring is made of 100% percent solid Bamboo wood. To read more about Bamboo Hardwood Flooring and Bamboo Wood please visit our Bamboo Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Carbonized Bamboo Wood Flooring?

This Carbonized Bamboo Flooring can be installed by Nail Down,Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Bamboo Floors Come From

Carbonized Bamboo Wood Floors are made of the Bamboo Tree. To read more about Bamboo tree and the Bamboo wood please visit our Bamboo Wood Species Information Page

Match Hardwood Flooring Mouldings to This Bamboo Floor

Looking for a Carbonized Bamboo Reducer Moulding to match to this floor? Or maybe a Stair Nosing with Carbonized Bamboo Stain? Please visit our Carbonized Bamboo Mouldings Page

Carbonized Strand Woven Bamboo Hardwood Flooring

This is a Prefinished Solid Strand Woven Bamboo Hardwood Flooring with a Carbonized Stain. The Bamboo Floors come with a Flat, Smooth surface finish, coated with 8 Layers of Aluminum Oxide. These layers provide your Hardwood with durability, stability and protection for years to come. This Solid Strand Woven Bamboo wood floor comes in a thickness of 5/8" inches and in a width of 3-3/4" inches.

Flooring Specifications

Wood Species:	Bamboo
Wood Stain:	Carbonized Strand Woven
Origin Country:	China
Botanical Name:	Phyllostachys, pubescens
Board Thickness:	5/8" (15.875 mm)

Board Lenth:	37.8" (96.4 cm)
Sutface Finish:	Flat
Janka Hardness Score:	2820
Protective Finish:	Aluminum Oxide (8 coats)
Manufacturer Warranty:	WoodCrafters Warranty

100% Solid Bamboo Wood Flooring

This Strand Woven Bamboo Flooring is made of 100% percent solid Bamboo wood. To read more about Bamboo Hardwood Flooring and Bamboo Wood please visit our Bamboo Hardwood Flooring Information Page and our Hardwood Flooring Academy

How To Install Carbonized Strand Woven Bamboo Wood Flooring?

This Carbonized Strand Woven Bamboo Flooring can be installed by Nail Down, Staple Down or Glue Down Hardwood Flooring Installation Methods. To read more about Hardwood Flooring Installation please visit our Hardwood Flooring Installation Page

Know Where Your Bamboo Floors Come From

Carbonized Strand Woven Bamboo Wood Floors are made of the Bamboo Tree. To read more about Bamboo tree and the Bamboo wood please visit our Bamboo Wood Species Information Page

Applicator & More Water Wiz Pad Applicator

Applicator & More Water Wiz Applicator is expressly designed for the application of all water based floor finishes. The flocked foam of this water based applicator provides a smooth even coat when used. The thin water based applicator is suggested by all water based manfacturers because it permits the user to apply 2 or more coats when finishing. The Water Wiz Applicator and Water Based Applicator should be rinsed off thoroughly before first use.

3M 8210 Particulate Respirator Masks

3M Respirator Masks

3M 8210 Particulate Respirator Masks are lightweight, comfortable and easy to breathe through. Using expertise in filtration technologies and blown microfiber capabilities, 3M offers a family of respirators that meet workers needs for comfort and value.
This respirator masks features 3M's Advanced Electret Media (AEM), welded strap attachment, soft nose foam and adjustable noseclip to help provide a custom fit and secure seal.

3M 8210 Particulate Respirator Masks Functions & Purposes

3M 8210 Particulate Respirator Masks are designed to help provide comfortable, reliable worker protection against certain non-oil based particles. Its lightweight construction helps promote greater worker acceptance and comfort and increased wear time.
3M 8210 Particulate Respirator Masks are recommended for Sanding, Grinding, Sawing, Sweeping and Insulating.

3M 8210 Particulate Respirator Masks Specifications

Quantity:

20 Masks per Box

More Details About 3M 8210 Particulate Respirator Masks

For the MSDS information from the manufacturer website please click here