Harco's California Gold Polyurethane

Harco's California Gold Polyurethane is the result of new technology to meet the strict California VOC standards. Even though it meets the strict VOC standards, California Poly has all the characteristics and performance qualities of traditional polyurethane finish. This low viscosity, diamond strength finish dries, cures and applies like an ordinary oil-modified finish.

Harco's California Gold Polyurethane Wood Floor Finish Features & Benefits

Harco's California Gold Polyurethane Wood Floor Finish Installation

How To Use

Preparation: Apply finish with Lambs Wool or Foam applicator at room temperature, not in direct sunlight. Mix contents of can with paddle before use.
Product will blend together easily. Do not use paint sheker or other mixing devices that will cause bubbles to form in the can. California Gold Polyurethane can be used as a sealer and finish coat. If a fast dry sealer is a preferred use Harco quick dry polyurethane and Sanding Sealr is used for first coat allow at least 2 houres before recoating with California Gold Polyurethane.

Dries To Touch

4-6 hours and can be handled with care AFTER 24 HOUERS dry time and cure time are dependent on application method, temperature, humidity and proper ventilation.
Cold temperature high humidity, poor ventilation or heavy coat application will led to longer dry and cure times and may prevent proper film formation and hard ing of this finish.

When You Open The Can?

Although this product is a clear, oil-base polyurethane coating, new VOC reduction technology makes the product appear creamy, coffe colored in the can. It is also normal for this product to look milky when it is first applied to the floor and during the first 1-2 hours of cure & dry time. This product will turn crystal clear after 1-2 hours.